Entrance Original Dunker Motor Auto Sliding Door With BEA Original
Full-featured , easy to use automatic sliding door technology -
reflect the perfect combination of the safety
and accuracy .
STD420 control system is very intelligent : it can be auto-adjust
drive force by leaf weight to make leaf run stably . speedy and
smoothly ,specially fit for heavy transit entrance such as bank ,
hospital ,opera house and so on .
It is special double track can avoid leaf degress . The battery(
within standard part ) can open the door even on power failure .
The operator box can tune mode and preferences . STD420 can expand
to interface with many kind of sensor and control device .
Function and Characteristic
1. Install easy and fast .
2. Through operator box ,operating mode (auto,half-open , permanent
open ,exit,night ) and parameter ( speed , delay close , close
force , open width...) can be tuned .
3. Connectivity : beam sensor , key -switch , remote control ,
coded access controller , can interface to STD420 and STD420 system
can drive alarm and interface to another control system .
Single leaf opening width
|700mm to 2000mm|
|Double leaf opeing width||900mm to 3000mm|
|Max. weight (single leaf)||100KG|
|Max. weight(double leaf)||2x100KG|
|Body size(height x depth)||100mm x 180mm|
|Max. opening speed||0.7m/s|
|Max closing speed||0.4m/s|
|Closing delay time||0 - 60 second|
|Input||220V AC /50Hz or 24 VDC|
|Max. power consume||100W|
Standard accessories a set system of STD420 Automatic sliding door
1. Center computer Control 1 Unit
2. Power Module 140W transformer( include battery) 1 Unit
3. SLM420 Motor & Gear & Encoder & Wheels 1 Unit
4. STD420 Aluminium Rail 4.2 meter
5. Synchronous Belts(wired) 5 meter
6. Deflect Pulley 1 Unit
7. T-type Aluminium Roller Carrige 4 pieces
8. 12mm Screw 4 pieces
9. Lift 4 pieces
10. Radar sensor 2 pieces
11. Stop Block 2 pieces
12. Earth Connect Parts 1 piece
13. Cable 1 piece
Product picture :